Quantcast
Channel: Automotive Repair Manual Download and Reviews » Search Results » 2012 ford f150 engine block heater location
Viewing all articles
Browse latest Browse all 14

Ford F150 Serpentine Belt Replace Procedures

0
0

Changing the serpentine belt on a Ford F150 requires loosening the belt tensioner. However, depending in your specific type, you could have to take away a number of parts–and use special tools–to take away the belt.

Remove the Ford F150 Serpentine Belt Instructions

Park your Ford F150 on a protected place and open the hood.

Place a drain pan below the engine within the course of the higher radiator hose, the place it connects with the radiator, in case you have the 7.3L engine type. Remove the radiator clamp utilizing a Phillips screwdriver or ratchet and socket. Twist and pull the hose off the radiator becoming. Go to Step 6.

Remove the cooling fan mounting bolts utilizing a ratchet and socket in case you have a 6.0L engine type. Then take away the 4 cooling-fan stator mounting bolts utilizing a ratchet and socket and take away the stator. Go to Step 6.

Remove the air duct from the air cleaner assembly in case you have a 5.4L or 6.8L engine type. Go to Step 6.

Remove the fan assembly you probably have a four.6L engine type. Use particular Ford fan instruments 303-240 and 303-239 to take away the fan (see Suggestions). Transfer the fan assembly over the radiator shroud, away from the engine.

Remove the serpentine belt from the engine. On the 4.2L engine, rotate the belt tensioner counterclockwise utilizing a wrench and take away the belt; on the four.6L engine, rotate the belt tensioner clockwise utilizing a breaker bar with a half of drive and take away the belt; on the 5.4L and 6.8L engines, rotate the drive belt tensioner clockwise utilizing a wrench and take away the belt; on the 6.0L engine, rotate the belt tensioner clockwise utilizing a breaker bar with a half of drive and take away the belt; on the 7.3L engine, rotate the drive belt tensioner clockwise utilizing a breaker bar with a 1/2 drive and take away the belt.

Install the Ford F150 Serpentine Belt Instructions

Route the brand new serpentine belt over the accessory pulleys, besides the tensioner pulley, on all engine type. Rotate the tensioner pulley–in the identical route you turned it for belt removing–and slide the belt over the tensioner pulley. Be sure that the belt is correctly routed and seated on each accent pulley.

Install the fan assembly in case you have the 4.6L engine; set up the air duct when you have the 5.4L or 6.8L engine; set up the cooling-fan stator and fan, when you’ve got the 6.0L engine; and set up the higher radiator hose if in case you have the 7.3L engine type.

Add coolant to the coolant reservoir to carry the extent between the “Add” and “Full Sizzling” marks, when you’ve got the 7.3L engine. Begin the engine and let it attain working temperature. Add extra coolant as essential and switch off the engine.
[source ehow.com]


Viewing all articles
Browse latest Browse all 14

Latest Images

Trending Articles





Latest Images